A Type Bunching Machine
- Description
YK-φ300A-φ400A-φ500A-φ630A-φ800A automatic high speed wire twisting machine is suitable for the computer traverse, earphone cable, electronic wire, telephone cable, automotive wire, network cable and PVC wire copper to twist.
| Model | YK-φ300A | YK-φ400A-φ500A | YK-φ630A | YK-φ800A |
|---|---|---|---|---|
| Max rotate speed | 3000rev/min(6000twist/min) | 3000rev/min(6000twist/min) | 2000rev/min(4000twist/min) | 2000rev/min(4000twist/min) |
| Twisting | Suitable for above seven strand of the silver jacketed wire, tinned wire, enamelled wire, bare copper wire, copper-clad steel, copper cladding aluminum | |||
| Feed wire diameter | φ0.05-φ0.28mm | φ0.08-φ0.45mm | φ0.18-φ0.62mm | φ0.38-φ1.04mm |
| Twisting area | 0.035-0.45mm2 | 0.035-2.5mm2 | 0.18-6.0mm2 | 2.5-16mm2 |
| Lay length | 10 Segment 3.65-17.15mm | 40 Segment 3.7-30.6mm | 34 Segment 11.6-100mm | 30 Segment 29.7-157mm |
| Twist direction | Left and right can freely selected | |||
| Take-up bobbin |
Standard ABS bobbin:Outer diameter φ300 x Outer width 180x inner width 150x inner hole φ40mm |
Standard ABS bobbin:Outer diameter φ500 x Outer width 375x inner width 315x inner hole φ56mm | Standard ABS bobbin:Outer diameter φ630 x Outer width 360x inner width 300x inner hole φ80mm | Standard ABS bobbin:Outer diameter φ800x Outer width 600x inner width 500x inner hole φ80mm |
| Polish rod traverse | φ15mm | φ20mm | φ30mm | φ30mm |
| Center height of main shaft | 630mm | 685mm | 850mm | 1000mm |
| Method of main shaft lubrication | Butter lubricating | |||
| Brake | - | Adopt Japan original enter port brand NSK Electromagnetic brake | ||
| Bearing | Electromagnetic brake | |||
| Take-up tension | anual adjustment, Use 0.6kg Magnetic clutch (Adjustment outside the machine) | anual adjustment, Use 1.2kg Magnetic clutch (Adjustment outside the machine) | anual adjustment, Use 5kg Magnetic clutch (Adjustment outside the machine) | anual adjustment, Use 10kg Magnetic clutch (Adjustment outside the machine) |
| Protection | Inner and outer broken-wire automatic brake, meter count arrived will automatic shut-down | |||
| Safety protection | All the doors can be opened, and lifting no place can not start or automatic braking | |||
| Instruction | Machine state, have corresponding fault should indicator instructions | |||
| Control | Inverter Control Manual | |||
| Noise figure | About 75db | About 75db | About 75db | About 75db |
| Main motor power | 4KW | 5.5KW | 7.5KW | 15KW |
| Machine size(mm) | (L)2300×(W)1100×(H)1200 | (L)2780×(W)1280×(H)1260 | (L)3400×(W)1500×(H)1600 | (L)3650×(W)2150×(H)2100 |
| Weight | ||||
【 previous 】：No
【Next】：No
【Next】：No
Various Extruder Line
Single Twister (Cabling Machine)
Stranding Machine
- Description Of A Type Bunching Machine
- A Type Bunching Machine
- B Type Bunching Machine
- C Type Double Twist Cabling Machine
- The Picture Of D Type Double Twisting Machine
- YK-1250mm D Type Double Twist Stranding Machine
- YK-1600mm D Type Double Twist Stranding Machine
- YK-2000mm D Type Double Twist Stranding Machine
- See More