1 . Positioning should be correct. Building structure should be able to withstand the force applied to the rear suspension mechanism supporting the load at ;

2 hitch beam connection should be reliable , its structure should have sufficient strength and rigidity ;

3 with the number of weights shall comply with the specification, should be neatly stacked and theft .

(2) Suspension platform inspection requirements :

1 suspension platform should have sufficient strength and stiffness , should not appear welds, cracks , severe corrosion , screws , rivets should not be loose, not structural damage ; using the length should comply with the instructions provided ;

2 security fence should be complete and intact and has webs ; its height in the side of the building should not be less than 0.8m, the remaining three sides of not less than 1.1m, the fence should be able to withstand 1000N horizontal movement concentrated load . ;

3 non-slip floor should be intact and measures ; should drainage holes , and should not be blocked ; hanging around the platform shall be equipped with a height of not less than 150mm baffle and baffle and the bottom of the gap should not exceed 5mm;

4 shall be provided by the side of a building wall wheel, steering wheel and cushioning devices. ;

5 In the longitudinal tilt angle work platform should not exceed 8 °, but different models shall comply with the provisions of this machine instructions .

According to the above questions are finishing the practical work experience participants made ​​reference , any questions , please timely communication , correction

Various Extruder Line

• Various Extruder Line
• Co-extrusion Extruder Line
• Building Wire Extruder Line
• Power Wire & Sheath Of Wire Extruder Line
• CAT-5/CAT-5E/CAT-6 Data Cable Special Equipment
• BV/BVR Insulating Sheath Extruder Line
• LDPE/HDPE Foaming Extruder Line
• Physical Foaming Extruder Line
• See More

Single Twister (Cabling Machine)

• Description Of Cantilever Type Single Twister
• Cantilever Type Single Twister
• Φ1000mm Cantilever Type Single Twister
• Φ1250mm Cantilever Type Single Twister
• Description Of Frame Type Single Twister
• Vertical Type Single Twister
• Frame Type Single Twister
• A Type Single Twister
• See More

Stranding Machine

• Description Of A Type Bunching Machine
• A Type Bunching Machine
• B Type Bunching Machine
• C Type Double Twist Cabling Machine
• The Picture Of D Type Double Twisting Machine
• YK-1250mm D Type Double Twist Stranding Machine
• YK-1600mm D Type Double Twist Stranding Machine
• YK-2000mm D Type Double Twist Stranding Machine
• See More

Auxiliary Equipment

• Cutting Machine
• Computerized Automatic Coiling Machine
• Computerized Automatic Packing Machine
• Auto Coiling Machine
• Middle Cross Section Automatic Coiling Machine
• Big Cross Section Automatic Coiling Machine
• Winding Machine
• 405 Multifunction Winding Machine
• See More