B type magnetic powder clutch to control tension. Automatic tracing adjustment after setting roll diameter ratio, all the drive by synchronous belt.
Application: Copper twisting
Features of machine：
1. Max. speed of main axis is 3000RPM.
2. Automatic tension control: When wire twisting, the take-up tension needs to increase after take-up receives full bobbin from the bobbin bottom. The machine can automatic tracking and adjust the take-up tension, to make the take-up tension of the overall bobbin in consistency, meanwhile, the machine can also adjust the take-up tension without stop.
3. The main axis is natural circulation cooling of oil lubrication, which can prolong the service life of machine.
4. The wire guiding system is the latest structure and the conductor is directly connected to the bow belt from main axis conduction, which reduced the bruise and strand jumping phenomenon caused by the angle conduction faults on the aluminum bobbin.
5. All the B type machine adopts the synchronous belt drive, lay of precision, without lubricating point in the wire guiding system and it is clean, thus, can not due to add oil produce second wire and wear wire.
6. Simple operation: Only changed a capstan wheel when change the lay, reversing only to turn the reverse rod by hand.
7. Adopt advanced control method: The working procedure is controlled by double-frequency device and PLC. Different switch doors, internal and external wire-broken, the oil bit of the main axial and others all owns corresponding indication lamp instrument to monitor and indicate the operation status.
8. Convenience for management: All the automatic tension adopts code switch for adjustment and the user can compile the corresponding process files according to the code switch value to ensure the mass quality of the twisted wire.
9. Material and machining process of super high speed automatic wire twisting machine, pair twisting machine main axis for wire twisting machine performance have very large influence, a good wire twisting machine is running noises and vibration value should be conform to the standard, can not too high, under the main axis is bad, the vibration will increase when the machine is running, and the bearing damage rate will rising, so Handing according to the years of experience, continuous improving quality of main axis, in order to make the machine achieve the best condition.
HD-?250B-?300B-?400B-?500B-?630B-?800B super high speed automatic wire twisting machine is suitable for computer traverse, earphone cable, electronic wire, telephone cable, automotive wire, network cable and copper twist.